Nederlands
Deutsch
English
FrançaisNo products found...
The "TANK CURE" products are manufactured by the company Poly-Service. Their kit allows you to clean the inside of your fuel tank in a professional way. This fuel-resistant Tank Sealant is very common in the Netherlands, Germany, England and Belgium. Users have experienced more than 15 years of very satisfying experience with this sealant. It can be applied to different surfaces such as steel, aluminium, polyester and carbon fibre.
Treatment of the Tank Before the Application of Tank Sealant
In order to guarantee a good result, you always have to do some preparation on your tank. Before you apply the sealant the tank should be absolutely dry, free of grease and almost free of rust. "TANK CURE" offers you products that will assist you in the preparation of the tank.
"TANK CURE" Tank Cleaner
"TANK CURE" Rust Remover
"TANK CURE" Epoxy Remover
These products form an ideal base before you apply our tank sealant. We will briefly highlight each product:
"TANK CURE" Tank Cleaner
This is a strong cleaning fluid to remove the grease from your tank. We advise to always use this product because it will guarantee good adhesion of the sealant to the surface of the petrol tank. Especially if you apply the sealant in a tank for a two-stroke engine it is necessary to use the tank cleaner first.
"TANK CURE" Rust Remover
Tanks with a rusted interior can be treated very successfully with this product. We advise using the Rust Remover if the inside of your tank is severely rusted.
"TANK CURE" Epoxy Remover
This product will remove all old layers of paint and/or sealants. Only use this product if you would like to apply a new sealant or if you plan to weld on your tank. You only need this product if you like to remove old layers of sealant or paint or if welding is needed on a tank that has a sealant inside.
For a motorcycle tank, you will need 1/2 a litre of Tank Cleaner and 1/2 a litre of Rust Remover.
What can you achieve with our Tank Sealant?
What can you achieve with our Tank Sealant?
Application of the tank sealant
In order to guarantee a good result, you always have to do some preparation on your tank. Before you apply the sealant the tank should be absolutely dry, free of grease and almost free of rust. It is strongly recommended to use our TANK CURE Cleaner and TANK CURE Rust Remover according to our user guidelines to guarantee a good result. These products are extensively tested in combination with our Tank Sealant.
"TANK CURE" tank sealant is based on a 2 component epoxy resin. After adding the two components together stir them thoroughly for a couple of minutes, empty the can in your petrol tank and seal the filler opening properly. Now slowly turn the tank in all directions. Keep turning for about 15 to 20 minutes. The sealant should touch all surfaces several times to form a good layer. Now open the filler cap and put the tank upside down to drain as much sealant as possible.
You will find several products on the market to treat petrol tanks. Whatever product you are going to use: It is very important to apply sufficient sealant to cover the inside of your tank completely. Being unable to look inside the tank during the sealing process, you have to stay on the safe side. Experience shows that you will need approx 450 grams for a 15 to 20-litre petrol tank. "TANK CURE" supplies two standard packages of sealant. A 450-gram package for motorcycle tanks up to 20 litres and a 600-gram package for car tanks up to 60 litres.
